Tag Archive | Elsa

Prom Dress for Queen Elsa!

Hi there, so this past few weeks has been go go go! We are heading to Florida for a little vaca to see my family and…go to DISNEYWORLD!!! Ahhh it’s my little princess’ first time, eek I can’t wait. She keeps watching videos people have posted on YouTube of what’s at disneyworld. Hee hee she’s so excited, and I have to say, I think I might be just a wee bit more. I’ve been making tons of cute little sundresses for her. I mean ya gotta have sundresses for Florida right, 😉 those photos will come later. For now let’s talk about the title of this post.

Well, a while back, when I was making “Queen Elsa’s” costume, the girl who played her asked me to make her prom dress. Wow, I was flattered and nervous at the same time. But then she told me that she wanted an Elsa “like” dress, so I wasn’t so worried.

Anyway, the dress was a bit tricky, well the top was. It’s a three piece dress, It has a corset top, skirt, and a sash that goes around her waist. In the photos you can’t see the sash very well, but it’s made of a sheer stretch material with sparkles, and it is floor length. So when she is walking it almost cascades behind her and touches the floor.

The top is made of a royal purple sequin fabric, with a black lining and has a zipper closure. I gotta say working with sequins is not an easy task. There were little tiny pieces of sequins flying all over the place when I was cutting the fabric. Then making sure all those little guys are facing the same direction during the sewing. Haha I still think I have some floating around somewhere. Oh well the end result was very rewarding.

Well enough of my blabbing, here are the pics of the dress. Hope you like them. Thanks for reading!!!

Oh by the way, I had some extra fabric so I made her a little clutch purse to go with it. 😉

Xo Christina





A Frozen Birthday Bash!!

So after much preparing, baking cupcakes and cake, sewing, searching on pintrest, and crafting, my daughter’s 4th “Frozen themed” birthday party is over and was a success!!! As you know, a friend of a friend, lol, played the character “Queen Elsa” from the Disney movie Frozen. I made her costume, styled her wig, and made the snowflake pins for the wig, in which I blogged about previously. Well, I have to say I am glad it’s over and I can relax a bit, but it was also so amazing! All the kids went crazy, especially my Bella. She was a little nervous at first, but then was so over joyed to be spending her special day with her favorite Disney Princess.

Elsa was AMAZING!! She must have been asked a million questions by the kids, in which she answered them ALL perfectly. She sang the hit song “Let it Go” with all the kids, while all of the kids were belting out the words with her lol. Whenever Elsa was walking around, Bella kept picking up her cape so no one would step on it, so adorable.  After all her “duties” were done, which was about an hour, she chose to stay longer, until the end of the party for that matter! She even herded all the kids outside to play! WOW, word’s just do NOT express how wonderful she was, such a blessing.

Well, aside from Elsa’s costume, I also made about 70% of all the decorations for her party. I usually go crazy making decorations for all of her birthday parties anyways, but this one in particular I went all out on. I made so many origami white Christmas trees, that I glittered up, used a few different kinds of paper to make cone trees, and glittered those up too,  a few banners, drew a huge olaf for pin the nose on Olaf, made a Piñata, etc.

For food it was simple, although, I made the cutest little march mellow Olaf heads. Ok so they weren’t perfect, but they still served their purpose. Aside from all that, everything else was simple and fun. Of corse I have so many pictures for you to see. I hope you enjoy them all, and thanks for reading!

Hope your having a wonderful day!

XO Christina

P.S Towards the end of the party poor Elsa’s wig was starting to loose it’s grip on her head, so the last few pics you see her hairline. Oh well the kids didn’t notice one bit…SCORE!










By the way this is the Olaf I drew for Pin the nose on Olaf! And I also made the “Frozen” piñata, which I will never be doing again. That took like 5 hours to make, and my fingers had blisters on them afterwards from the hot glue…OUCH!


I DSCN3547


This was when Elsa was singing “Let it Go” with all the kids…definitely made the party!






Queen Elsa costume finished and tutorial of her cape!!

Hi there!! So I’m finally finished with Queen Elsa’s costume, well, almost, I have to add a couple hook and eye’s but that doesn’t take more than 10mins. So anyway, I forgot to take pictures of me making the cape, so I drew out a plan for you of what I did.

Ok, so as far as determining the length of the cape, I just measured from under the arm to the floor, then added about 4″ to the length for a slight train. I didn’t make the cape super long like Elsa’s because it’s for a 4 year old b-day party, and I didn’t want anyone stepping all over it and possibly ripping it.

As you can see, at the top you just measure the length of the top back from under one arm, which is where a side seam should be, to under the arm of the opposite side. After doing that, I added about half and inch to all sides to make room for hemming. (NOTE: I added about 2″ to the top of cape, which isn’t shown on the picture, to make room for the velcro.) Now, that can be tricking when your using sheers, I used costume sheer, so I really couldn’t iron it without melting it. So I used my 1/4″ hemming foot on my sewing machine for them, which came in handy, because you have to hem all sides of the cape.

As far as the cut out in the bottom of the cape, I just cut straight back from fold about 12-14″ then graded it up slightly to create the train. I hope my illustration helps you understand.


For the velcro, I just measured, cut, and sewed, lol. I used more velcro then I probably needed to, but I wanted to be sure it would withstand 4 year olds. So yea, I just sewed the soft side of the velcro to the inside top of the corset, and the other side of the velcro to the top of the cape. Be sure you leave a small gap in the middle of the cape for the zipper.



Ok so that’s it, if you have questions, just comment and I’ll answer them to the best of my ability. If your seeing this for the first time, in my previous post I pictured the pattern I used to make elsa’s skirt and corset top. “Queen Elsa’s Skirt Finished!!!


OH I totally forgot, I also made a long-sleeved shirt to go under the corset top, that was super simple, I just used another long sleeved shirt as a template. Then added little V’s to the end of the serves that rest on the top of your hand. I used a stretchy mesh material, that just so happened to have a bunch of silver glittery, sparkly, swirls all over it. By the way, when your sewing shirts that have stretch to them, make sure the fabric stretches to the width of your body, not the length, including the sleeves.

IMG_1894There ya have it, all finished, and ready to be warn. I will, of corse, post more pictures later when I get together with “the queen” for a dress rehearsal. Thanks for reading and I hope you have a swell day!

XO Christina

P.S Sorry for the lack in my photography..when the costume is actually being worn, I will upload way better pictures!!!


Queen Elsa’s Skirt Finished!!!

Good Morning, afternoon, or evening, hope your having a wonderful day so far. I wanted to quick share with you my latest project…Queen Elsa’s skirt! YES for little miss Bella’s b-day bash. No I didn’t add a slit to the front of the skirt, if it wasn’t going to be a kids party then I could have, but I didn’t feel it was necessary. Anyway, it’s made of of sparkly, teal, satin, and let me tell ya, I didn’t realize how easy satin is to work with. It doesn’t have any give to it, and it’s a light/medium weight. Now normally I would have added a lining, but because it’s a costume and it’s only going to be worn for about 2 hours, I wasn’t worried about that. However, I had to add 2″ to the skirt length because the girl who is playing elsa is 5′ 9″!!

Quick tip: if you find your self in need to lengthen or shorten a pattern, well usually for shirt top patterns, there is a line already printed on the pattern to lengthen or shorten. However, most skirt patterns do NOT have that feature. SO the way you would adjust it is to find the hip of the pattern, measure about an inch down, from the hip, and draw a line across the entire width of the pattern. Cut on that line and lengthen or shorten to your desired length. In the picture below you’ll see a pattern piece to part of the corset top I’m making for part of Elsa’s top. It’s hard to see but this pattern came with a lengthen or shorten line, which I cut and had to lengthen it 4″ to fit the girl I’m making it for properly.


Ok so back to the skirt, I’ll just show you the picture of it, sorry again i’m NOT a photographer, and this picture definitely does NOT give the skirt justice. It’s not as dark as portrayed in the photo, it’s a little lighter and brighter, and sparklier haha!


Thanks for reading, have a wonderful day, and for those in northern areas, STAY WARM it’s bitter cold out there!!

XO Christina

BTW: I am using this pattern to make the skirt “F” and corset top “A”, except the corset top will have a V on the center front bottom, and will fit a little more snug,  like Elsa’s. So if your wanting to make a “queen Elsa” costume, this pattern may help you. The sleeves and the cape I’m making from scratch, haha I sound like I’m cooking. So I will try and make a small photo/tutorial of the cape and shirt when I make them.